- Based on basic sim800c version, aiming for the cheapest and smallest.
- Total board size is 22.5 * 21 mm, the “hangout” is 15.5 * 3mm.
- Can use standard 2.54mm pin head, or solder vertically on your main board.
- Pin Deifnition – Boot key, VBAT, ADC, GND, TX, RX
- Boot key can be drived by MCU IOs.
- 3.3/5V compliant Serial UART interface.
- Vbat 4.2V power supply, if power from 5V, can use a diode 1N400x to drop voltage to 4.2V, see more on wiki page. No need DC-DC, confirmed this by simcom.
- Nano sim card size (iphone size)
- Netlight LED on backside of the board.
- Solid 680uF/6.3V tatanlum capacitor to against current burst.
- IPEX GSM connector.
Sim800C documentation please see on this page.
The post SIM800C Mini Embedded Board appeared first on ElectroDragon.