ATGM336H-5N
- Based on the fourth generation of low-power GNSS SOC Chips – AT6558
- All tracking system supported – GPS/US, Beidou/CN, GLONASS/RU, Galileo/EU, QZSS/JP, SBAS/enhanced system, all in one.
- Contains 32 tracking channels that can receive GNSS signals from six satellite navigation systems simultaneously and enables joint positioning, navigation and timing.
- High sensitivity, low power consumption, low cost
- Suitable for car navigation, handheld positioning, wearable devices
- Can replace Ublox MAX, NEO-6M, 7M, 8M directly.
- Output standard NMEA0183 signal from serial.
More Features:
- Support A-GNSS
- Cold start capture sensitivity: -148dBm
- Tracking sensitivity: -162dBm
- Positioning accuracy: 2.5 meters (CEP50, open area)
- First positioning time: 32 seconds
- Low power consumption: continuous operation <25mA (@ 3.3V)
- Built-in antenna detection and antenna short-circuit protection
Board Features:
- Board size 15.7 x 13.1 mm
- Package include main board and ipex antenna.
- Pin Definition 5V, GND, TXD, RXD, PPS. (PPS output time signal which can be connected to MCU IOs)
Datasheet, documentation please see wiki page.
The post GNSS Module, GPS Beidou, ATGM336H appeared first on ElectroDragon.